View 1300131001_4462687.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FEATURES AND SPECIFICATIONS
Brad(R) Foundation Fieldbus Cordsets and Receptacles 130041 Mini-Change(R) FF Cordsets 130042 Micro-Change(R) FF Cordsets 130040 Micro-Change & Mini-Change FF Receptacles 130045 Micro-Change & Mini-Change Tees 130044 Micro-Change & Mini-Change Field Attachables
Features and Benefits n Mini-Change and Micro-Change are proven, rugged connector designs n IP67-rated connectors provide a dust-tight and water-tight connection n Quick-connect, modular wiring system with keyed, pre-wired molded connectors provide fast installation that eliminates field wiring errors n Foundation Fieldbus `Type A' compliant shielded cables allows users to take full advantage of the maximum run lengths possible per the protocol while minimizing the potential for communication errors
Molex releases the Brad Mini-Change and Micro-Change molded connection systems for fast, error-free Foundation Fieldbus installations Foundation Fieldbus is a communication protocol used to interconnect field-level instrumentation and control devices to a PLC (Programmable Logic Controller) or DCS (Distributed Control System) controller in a process automation control system. Foundation Fieldbus is employed in the control systems of oil & gas production, refineries, petrochemical plants, chemical manufacturing and pharmaceutical manufacturing. At the physical-layer level, Foundation Fieldbus allows multiple devices to communicate digitally over the same wire. The Foundation Fieldbus physical layer, i.e., cable/transmission signal requirements, is specified in the ISA SP50.02 and IEC 1158-2 standard for fieldbuses. The cable specifications are listed in the Cable Standard FF-844 , which is issued by the Fieldbus Foundation, the organization that controls and maintains this open standard. Brad Foundation Fieldbus products from Molex are fully complaint to these specifications. Brad Foundation Fieldbus products from Molex are based on the proven Mini-Change and Micro-Change circular, circular connector families. These sealed, watertight connectors offer the ruggedness required in the most demanding industrial applications. The pre-wired, keyed connectors provide a modular wiring system that is not prone to field wiring termination errors. For additional product information visit: www.molex.com/link/fieldbus.html.
SPECIFICATIONS Mini-Change Electrical Voltage (max.): 300V AC/DC Amperage (max.): 10A Initial Contact Resistance: < 5m avg. @ 3 Resistance after Durability Testing: < 5m avg. @ 3 Mechanical Molded Body: PVC Insert: PVC Contact: Patented, Quad-Beam Design. Brass with Gold Plate. Stainless Steel Outer Sleeve Coupling Nut / Receptacle Shell: 316 Stainless Steel or Nickel Plated Brass Axial Pull Strength: 100 lbs Side Load Strength: 20 lbs Environmental Environmental Seal: IP67 Cable Temperature: -40 to +105C (-40 to +221F) Micro-Change Electrical Voltage (max.): 250V AC / DC Amperage (max.): 4A Initial Contact Resistance: < 5m avg. @ 3 Resistance after Durability Tests: < 5m avg. @ 3 Mechanical Molded Body: PVC Insert: Nylon Contact: Brass with Gold Plate. O-ring: Viton Coupling Nut / Receptacle Shell: 316 Stainless Steel or Nickel Plated Brass Axial Pull Strength: 50 lbs. Side Load Strength: 20 lbs. Environmental Environmental Seal: IP67 Cable Temperature: -40 to +105C (-40 to +221F)
n Stainless steel or nickel plated cordset coupling nuts and receptacle shells ensure corrosion resistance in demanding environments
APPLICATIONS
Brad(R) Foundation Fieldbus Cordsets and Receptacles 130041 Mini-Change(R) FF Cordsets 130042 Micro-Change(R) FF Cordsets 130040 Micro-Change & Mini-Change FF Receptacles 130045 Micro-Change & Mini-Change Tees 130044 Micro-Change & Mini-Change Field Attachables
Description MC 4P FP STR SS316 CNUT #18-2 FF Cable - 2M MC 4P FP STR SS316 CNUT #18-2 FF Cable - 5M MC 4P FP STR SS316 CNUT #18-2 FF Cable - 10M MC 4P FP 90 SS316 CNUT #18-2 FF Cable - 2M MC 4P FP 90 SS316 CNUT #18-2 FF Cable - 5M MC 4P FP 90 SS316 CNUT #18-2 FF Cable - 10M MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable - 0.6M MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable - 1M MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable - 2M MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable - 3M MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable - 4M MC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable - 5M N/A 3313 N/A Sample Plant No. 3313 N/A
Foundation Fieldbus is commonly found in the following Process Automation implementations: n Oil & Gas Production and Transportation Facilities n Oil Refineries n Petrochemical Complexes n Chemical Production Plants n Waste-Water Processing Plants n Pharmaceutical Manufacturing n Food & Beverage Processing
ORDERING INFORMATION Mini-Change Cordsets with SS316 Coupling Nuts
SAP Material # 1300410016 Single Ended Cordsets Fem-Str 1300410017 1300410018 1300410019 Fem-90D Female-Male 1300410020 1300410021 1300410028 1300410029 Double Ended Cordsets 1300410030 Str-Str 1300410031 1300410032 1300410033 Engineering Part # ** 104000D09M0208 104000D09M0508 104000D09M1008 104001D09M0208 104001D09M0508 104001D09M1008 114030D09M0068 114030D09M0108 114030D09M0208 114030D09M0308 114030D09M0408 114030D09M0508
**Available Cable Options
D07 18/3 Orange FF Shielded Cbl, w/gnd, w/drain, PVC D08 18/3 Blue FF Shielded Cbl, w/gnd, w/drain, PVC
D09 18/2 Orange FF Shielded Cbl, w/o gnd, w/drain, PVC D10 18/2 Blue FF Shielded Cbl, w/o gnd, w/drain, PVC
Mini-Change Receptacles and Accessories with Stainless Steel Hardware
SAP Material # Female Receptacles Terminator Tee Closure Caps Field Attachable Bulkhead Pass-Thru For Female For Male Female Male Fem-Male Male Male 1300400013 1300400014 1300400015 1300460004 1300450002 1302011110 1302011113 1300440001 1300440002 1300131001 Engineering Part # 1R4000A42M0058 1R4006A42M0058 1R4M36A42M0058 104006FF8 T140140-001FF8 65-0085SS 65-0086SS 1A4000-34FF8 1A4006-34FF8 1R40301 Description MC 4P F/FR #18 1/2NPT SSS316 - 0.5M MC 4P MR #18 1/2NPT SS316 - 0.5M MC 4P MR #18 M20X1.5 SS316 - 0.5M Mini-Change, Male FF terminator w/ SS316 CNUT TEE - MC In, MC Out, MC Drop w/ SS316 CNUT MC Closure Cap for Female Connector - SS w/ bead chain MC Closure Cap for Male Connector - SS w/ bead chain MC 4P F-ATTACH STR PG 13.55 FF w SS316 CNUT MC 4P M-ATTACH STR PG 13.55 FF w SS316 CNUT MC 4P M/MFE BULKHEAD FEED - THRU - SS Sample Plant No. 3313 3313 N/A 3313 3313 3313 3313 3313 3313 N/A
ORDERING INFORMATION
Brad(R) Foundation Fieldbus Cordsets and Receptacles 130041 Mini-Change(R) FF Cordsets 130042 Micro-Change(R) FF Cordsets 130040 Micro-Change & Mini-Change FF Receptacles 130045 Micro-Change & Mini-Change Tees 130044 Micro-Change & Mini-Change Field Attachables
Engineering Part # ** 804000D09M0208 804000D09M0508 804000D09M1008 804001D09M0208 804001D09M0508 804001D09M1008 884030D09M0068 884030D09M0108 884030D09M0208 884030D09M0308 884030D09M0408 884030D09M0508 Description MIC 4P FP STR SS316 CNUT #18-2 FF Cable - 2M MIC 4P FP STR SS316 CNUT #18-2 FF Cable - 5M MIC 4P FP STR SS316 CNUT #18-2 FF Cable - 10M MIC 4P FP 90 SS316 CNUT #18-2 FF Cable - 2M MIC 4P FP 90 SS316 CNUT #18-2 FF Cable - 5M MIC 4P FP 90 SS316 CNUT #18-2 FF Cable - 10M MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable - 0.6M MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable - 1M MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable - 2M MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable - 3M MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable - 4M MIC 4P M/MFE STR/STR SS316 CNUT #18-2 FF Cable - 5M N/A 3313 N/A Sample Plant No. 3313 N/A
Micro-Change Cordsets with SS316 Coupling Nuts
SAP Material # 1300420030 Single Ended Cordsets Fem-Str 1300420031 1300420032 1300420033 Single Ended Cordsets Fem-90D Fem-Male 1300420034 1300420035 1300420042 1300420043 Double Ended Cordsets 1300420044 Str-Str 1300420045 1300420046 1300420047
**Available Cable Options
D07 18/3 Orange FF Shielded Cbl, w/gnd, w/drain, PVC D08 18/3 Blue FF Shielded Cbl, w/gnd, w/drain, PVC
D09 18/2 Orange FF Shielded Cbl, w/o gnd, w/drain, PVC D10 18/2 Blue FF Shielded Cbl, w/o gnd, w/drain, PVC
Micro-Change Receptacles and Accessories with Stainless Steel Hardware
SAP Material # Receptacle Receptacle Terminator Tee Closure Caps Closure Caps Bulkhead Feed-Thru For Female For Male Fem-Male Female Male Male 1300400006 1300400007 1300460008 1300350097 1200770065 1200770139 1200700408 8R4L301 Engineering Part # WR4000A42M0058 WR4006A42M0058 804006FF8 MICT5558 80014 Description MIC 4P F/FR #18 1/2NPT - SS316 - 0.5M MIC 4P MR# 18 1/2 NPT - SS316 - 0.5M Micro-Change, Male FF terminator w/SS316 CNUT TEE - MIC In, MIC Out, MIC Drop w/ SS316 CNUT M12 Closure Cap for Fem Connector, SS w/SS bead chain M12 Closure Cap for Male Connector, SS w/ SS bead chain MIC4P M/MFE BULKHEAD FEED-THRU-SS Sample Plant No. N/A 3313 3313 3313 3313 3313 N/A
www.molex.com/link/fieldbus.html
Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX amerinfo@molex.com
Order No. 987650-2541
Asia Pacific North Headquarters Yamato, Kanagawa, Japan 81-46-265-2325 apninfo@molex.com
Asia Pacific South Headquarters Jurong, Singapore 65-6268-6868 apsinfo@molex.com
USA/KC/2008.11
European Headquarters Munich, Germany 49-89-413092-0 eurinfo@molex.com
Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. P: 630-969-4550 F: 630-9691352
(c) 2008, Molex

▲Up To Search▲

Price & Availability of 1300131001

	To Download 1300131001 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .